ISO5852SMDWREP Integrated Circuit Chip 5700V Rms 5.5A Isolator Gate Driver

ISO5852SMDWREP Coupling 5700Vrms 1 Channel 16-SOIC 5.5A Isolators Gate Driver

Features of ISO5852SMDWREP

1• 100-kV/μs Minimum Common-Mode Transient
Immunity (CMTI) at VCM = 1500 V
• Split Outputs to Provide 2.5-A Peak Source and
5-A Peak Sink Currents
• Short Propagation Delay: 76 ns (Typ),
110 ns (Max)
• 2-A Active Miller Clamp
• Output Short-Circuit Clamp
• Soft Turn-Off (STO) during Short Circuit
• Fault Alarm upon Desaturation Detection is
Signaled on FLT and Reset Through RST
• Input and Output Undervoltage Lockout (UVLO)
with Ready (RDY) Pin Indication
• Active Output Pulldown and Default Low Outputs
with Low Supply or Floating Inputs
• 2.25-V to 5.5-V Input Supply Voltage
• 15-V to 30-V Output Driver Supply Voltage
• CMOS Compatible Inputs
• Rejects Input Pulses and Noise Transients
Shorter Than 20 ns
• Operating Temperature: –55°C to +125°C
Ambient
• Surge Immunity 12800-VPK (according to IEC
61000-4-5)
• Safety-Related Certifications:
– 8000-VPK VIOTM and 2121-VPK VIORM
Reinforced Isolation per DIN V VDE V 0884-10
(VDE V 0884-10):2006-12
– 5700-VRMS Isolation for 1 Minute per UL 1577
– CSA Component Acceptance Notice 5A, IEC
60950-1, IEC 60601-1 and IEC 61010-1 End
Equipment Standards
– CQC Certification per GB4943.1-2011
– All Certifications Complete per UL, VDE, CQC,
TUV and Planned for CSA

Environmental & Export Classifications

Description of ISO5852SMDWREP

The ISO5852S-EP device is a 5.7-kVRMS, reinforced isolated gate driver for IGBTs and MOSFETs with
split outputs, OUTH and OUTL, providing 2.5-A source and 5-A sink current. The input side operates
from a single 2.25-V to 5.5-V supply.

ISO5852SMDWREP Integrated Circuit Chip

5700v Rms Integrated Circuit Chip

5.5A ISO5852SMDWREP

ISO5852SMDWREP Integrated Circuit Chip 5700V Rms 5.5A Isolator Gate Driver Images